«

»

Oct
21

Great Plumbing Tips You Can Do On Your Own

Great Plumbing Tips You Can Do On Your Own

Great Plumbing Tips You Can Do On Your Own

Nowadays the need for effective home plumbing is on the rise. The demand for products and equipment leads to some very innovative techniques that you can do yourself. Now is your chance to find something that works for your plumbing system. Here are some tips that you can use to get you started with doing your own plumbing.

Rigid copper is used for main water lines in many homes. You cannot bend rigid copper, so joints and tees must be soldered on. When soldering, always apply flux (also called soldering paste) to both surfaces. Flux retards oxidation when the copper is heated. Always use lead-free or nearly lead-free solder when sweating a copper joint.

Check the filters in your furnace, regularly. If these filters have not been cleaned or replaced recently, they may become clogged. This will affect how well your furnace is able to work, meaning that you may not have enough heat during the winter. Take this simple step, as soon as the weather starts to become cold.

Avoid frozen pipes this winter! Keep a small trickle of water dripping from faucets, and wrap your uninsulated pipes with foam or newspaper. If possible, keep the doors open between unheated and heated rooms. In an unheated area such as a garage or laundry room, keep a small heater next to the pipes. Remember to do this before the first cold snap hits.

When concerned with plumbing, you need to know what can cause noisy pipes. This is important because it can mean the difference between an annoying noise and flooding in your house. Do your research to distinguish between the different noises and hire a professional if any serious risk is posed.

Pump out your septic tank at least every five years to keep it in proper working condition. Doing so avoids sediment build up, so that you don’t have any kind of septic system backup. In this case, the cost of prevention definitely outweighs having your septic backing up into your house or failing.

To avoid wasting water and having a potentially high water bill, check your home for leaky faucets periodically. Fix any leaks that you find right away. You may be able to do the repair yourself, but if not, you may have to seek the services of a plumber to make the repairs.

At least once a year remove the faucet aerator and clean the screens. This helps it properly function. The function of a faucet aerator is to allow for an even flow of water and to conserve water. Be sure to clean out the aerator and you’ll notice a these things working.

Got a leaky pipe? In many cases you can repair this yourself without the expense of a plumber. If a joint is leaking, tighten it with a pipe wrench. If the leak is coming from a damaged section of pipe, you can try repairing with a store-bought patching kit. One method involves applying waterproof tape to the section of pipe where there is leakage. Before applying the tape, make sure the pipe is thoroughly dry. Make sure that the tape covers two to three inches on either side of the breakage in the pipe.

If water backs up from one sink to another, it is because the lines are connected. The part of the branch line for one device might be higher than another, but most likely there is also a blockage in the branch line connecting the two devices as well. This blockage must be cleaned.

As you have read, there are many different ways to deal with and maintain your own plumbing. You need to find the treatment that works for you. There is a ton of information that can help you get started. By following these tips, you are well on your way to doing your own plumbing like a pro.

Leave a Reply

Your email address will not be published.

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>